- The Granada GR7510 petrol hedge saw is designed for trimming and pruning hedges and shrubs in gardens and farms. It features a powerful and stable 22.5cc two-stroke engine, along with a 75cm (30in) double blade for precise and even cutting. Its balanced design and comfortable handle minimize vibration during operation, making it ideal for extended use in gardens, farms, and villas.
Product features:
- A powerful and stable-performance motor with a capacity of 22.5 cm³.
- Double blades, 75 cm long, for even and fast cutting.
- Ergonomic and balanced design reduces vibration during operation.
- Lightweight and easy to control in all cutting positions.
- A simple and responsive manual operating system.
- Suitable for shaping and pruning fences and dense shrubs.
Technical specifications:
- Trade name: GRANADA GR7510
- Type: Gasoline fence saw
- Power: 650 watts (approximately 0.9 horsepower)
- Engine capacity: 22.5 cm³
- Engine type: Two-stroke
- Cooling: by air
- Maximum speed: 3000 RPM
- Blade length: 75 cm (30 inches)
- Weight: 5.8 kg
- Fuel blending ratio: 1 liter of oil to 25 liters of gasoline
- Country of origin: China
How to use:
- Use unleaded gasoline (91 or 95) with a two-stroke oil designed for gasoline engines such as STIHL , Husqvarna or Castrol 2T .
- Mix the oil with the gasoline at a ratio of 1:25 (i.e., 40 ml of oil per 1 liter of gasoline).
- Shake the mixture well before filling the fuel tank to ensure the oil is distributed throughout the gasoline.
- Check the oil level in the gearbox, and add SAE 10W-30 light gear oil when needed.
- Turn on the device by pulling the operating cord after closing the air choke to facilitate initial operation.
- After starting, wait until the engine warms up a little, then start trimming the fences and bushes from the top and sides.
- After finishing, clean the blades of any remaining leaves and dust, then apply a light layer of oil to maintain their sharpness and prevent rust.